 The amazing FloodCam is a weather-resistant wireless color video camera with built-in 2.4 GHz transmitter and motion sensor and attached dual floodlight casing. The FloodCam is activated by the integrated motion sensor so that when someone approaches your home, the floodlights (bulbs not included) come on, turning night into day and the camera catches the startled intruder on video! The camera transmits its picture via a built-in 2.4 GHz transmitter to a Video Receiver which you connect to a TV or PC anywhere in your home. The FloodCam sends the wireless signals even through walls, up to 100 feet so you can watch and record all the action!  The SECRET behind the FloodCam is the "smart" Built-In Wireless Motion Sensor (see photo on right). The video camera always turns on when motion is detected and the floodlights always turn on when it is dark and motion is detected.
In a multi-camera setup, the motion sensor sends wireless Radio Frequency (RF) signals to an X10 Transceiver (or VCR Commander II.) The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring. These signals send the information back out to turn off the other cameras or to sound a chime, illuminate hallway lights, etc. This is a very simple system to install - just a few connections and you're up and running assuming you will use the FloodCam to replace an existing floodlight fixture. If not, you will need to install a wall box and run conduit to it. If you need help installing a wall box and running conduit please contact a local X10 professional installer.
Additional Features & Specifications: - Camera uses "Instant-ON" technology. No warm-up time when turning on or switching between cameras. You get instant LIVE crisp video!
- Easily integrates into your multi-camera system. Acts just like an XCam2 Camera!
- Weather-resistant casing. Great for outdoors. (Operating Temp.: 32 to 131F)
- Field of View: 60 degrees
- Resolution: 310 TV Lines
- Auto Shutter: 1/60 to 1/15,000 sec. Note: Most TVs can only view 30 frames per second.
- Min. Illumination: 3 LUX (f1.9)
- Motion Sensor Range: 20 feet.
- Max wattage: 150W per lamp holder.
- Requires 120VAC
 | 
